Victron Energy - SmartSolar MPPT 150/85-MC4 VE.Can (12V/24V)
DISCONTINUED
Victron SmartSolar MPPT 150/85-MC4 12V/24V
The Victron SmartSolar MPPT 150/85 12V/24V solar charger collects energy from your solar panels and stores it in your batteries. Using the latest and fastest technology, SmartSolar maximises this energy harvest through intelligent control, so that a full charge is achieved in the shortest possible time. SmartSolar maintains the battery in good condition, extending its lifespan.
Victron SmartSolar MPPT 150/100 12V/24V is a solar charger for 12V/24V systems. The maximum nominal PV power that is transferred by the solar charger at a 12V system voltage is 1200W, at a 24V system voltage this is 2400W. The maximum PV no-load voltage of this solar charger is 150V. The SmartSolar solar charge controllers have a programmable battery charge algorithm, and standard Bluetooth Smart built in to be able to set the solar charger and monitor solar yield. With VE.Can or Bluetooth up to 25 solar chargers can be connected in series, and connected to a Color Control GX or other GX device. Each Controller can be managed individually, for example with a smartphone or iPad (Bluetooth) or with a Color Control GX (VE.Can) and then also on the VRM website.
Bluetooth Smart built-in: no dongle required
The wireless solution to set up, monitor and update the controller via Apple or Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control panel, Venus GX, PC or other devices.
Ultrasnelle Maximum Power Point Tracking (MPPT)
Especially in cloudy conditions and light intensity is constantly changing, an ultra-fast MPPT controller can improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in the case of variable shadow
In the case of variable shading, the power-voltage curve may contain two or more maximum power points. Conventional MPPTs usually exploit local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm always maximizes energy harvest by exploiting the optimum MPP.
BatteryLife: intelligent
If a solar charge controller cannot fully recharge the battery in one day, the result is often that the battery constantly fluctuates between 'partially charged' and 'fully discharged'. This condition (no regular full charge) will destroy a lead-acid battery within a few weeks or months. The BatteryLife algorithm monitors the state of charge of the battery and, if necessary, increases the load disconnect level slightly from day to day (by disconnecting the load earlier) until the harvested solar energy is sufficient to charge the battery to almost 100%. From that point on, the load disconnect level is modulated so that the battery is charged to almost 100% approximately once per week.
Programmable battery charging algorithm
The charge controller starts a new charge cycle every morning as soon as the sun starts to shine, based on a three-step charging process: Bulk – Absorption - Float. The battery charging algorithm is programmable with a set of default settings or user-defined settings.
Internal temperature sensor
Compensates absorption and float charge voltages for temperature.
Remote on/off
For example, for connection to a VE.BUS BMS.
Programmable relay
Can be programmed (eg via smartphone) to be activated by an alarm or other events.
Optional: linkable LC display
To do this, remove the rubber seal that protects the plug on the front of the controller and connect the display to it.
DISCONTINUED
Victron SmartSolar MPPT 150/85-MC4 12V/24V
The Victron SmartSolar MPPT 150/85 12V/24V solar charger collects energy from your solar panels and stores it in your batteries. Using the latest and fastest technology, SmartSolar maximises this energy harvest through intelligent control, so that a full charge is achieved in the shortest possible time. SmartSolar maintains the battery in good condition, extending its lifespan.
Victron SmartSolar MPPT 150/100 12V/24V is a solar charger for 12V/24V systems. The maximum nominal PV power that is transferred by the solar charger at a 12V system voltage is 1200W, at a 24V system voltage this is 2400W. The maximum PV no-load voltage of this solar charger is 150V. The SmartSolar solar charge controllers have a programmable battery charge algorithm, and standard Bluetooth Smart built in to be able to set the solar charger and monitor solar yield. With VE.Can or Bluetooth up to 25 solar chargers can be connected in series, and connected to a Color Control GX or other GX device. Each Controller can be managed individually, for example with a smartphone or iPad (Bluetooth) or with a Color Control GX (VE.Can) and then also on the VRM website.
Bluetooth Smart built-in: no dongle required
The wireless solution to set up, monitor and update the controller via Apple or Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control panel, Venus GX, PC or other devices.
Ultrasnelle Maximum Power Point Tracking (MPPT)
Especially in cloudy conditions and light intensity is constantly changing, an ultra-fast MPPT controller can improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in the case of variable shadow
In the case of variable shading, the power-voltage curve may contain two or more maximum power points. Conventional MPPTs usually exploit local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm always maximizes energy harvest by exploiting the optimum MPP.
BatteryLife: intelligent
If a solar charge controller cannot fully recharge the battery in one day, the result is often that the battery constantly fluctuates between 'partially charged' and 'fully discharged'. This condition (no regular full charge) will destroy a lead-acid battery within a few weeks or months. The BatteryLife algorithm monitors the state of charge of the battery and, if necessary, increases the load disconnect level slightly from day to day (by disconnecting the load earlier) until the harvested solar energy is sufficient to charge the battery to almost 100%. From that point on, the load disconnect level is modulated so that the battery is charged to almost 100% approximately once per week.
Programmable battery charging algorithm
The charge controller starts a new charge cycle every morning as soon as the sun starts to shine, based on a three-step charging process: Bulk – Absorption - Float. The battery charging algorithm is programmable with a set of default settings or user-defined settings.
Internal temperature sensor
Compensates absorption and float charge voltages for temperature.
Remote on/off
For example, for connection to a VE.BUS BMS.
Programmable relay
Can be programmed (eg via smartphone) to be activated by an alarm or other events.
Optional: linkable LC display
To do this, remove the rubber seal that protects the plug on the front of the controller and connect the display to it.
DISCONTINUED
Victron SmartSolar MPPT 150/85-MC4 12V/24V
The Victron SmartSolar MPPT 150/85 12V/24V solar charger collects energy from your solar panels and stores it in your batteries. Using the latest and fastest technology, SmartSolar maximises this energy harvest through intelligent control, so that a full charge is achieved in the shortest possible time. SmartSolar maintains the battery in good condition, extending its lifespan.
Victron SmartSolar MPPT 150/100 12V/24V is a solar charger for 12V/24V systems. The maximum nominal PV power that is transferred by the solar charger at a 12V system voltage is 1200W, at a 24V system voltage this is 2400W. The maximum PV no-load voltage of this solar charger is 150V. The SmartSolar solar charge controllers have a programmable battery charge algorithm, and standard Bluetooth Smart built in to be able to set the solar charger and monitor solar yield. With VE.Can or Bluetooth up to 25 solar chargers can be connected in series, and connected to a Color Control GX or other GX device. Each Controller can be managed individually, for example with a smartphone or iPad (Bluetooth) or with a Color Control GX (VE.Can) and then also on the VRM website.
Bluetooth Smart built-in: no dongle required
The wireless solution to set up, monitor and update the controller via Apple or Android smartphones, tablets or other devices.
VE.Direct
For a wired data connection to a Color Control panel, Venus GX, PC or other devices.
Ultrasnelle Maximum Power Point Tracking (MPPT)
Especially in cloudy conditions and light intensity is constantly changing, an ultra-fast MPPT controller can improve energy harvest by up to 30% compared to PWM charge controllers and by up to 10% compared to slower MPPT controllers.
Advanced Maximum Power Point Detection in the case of variable shadow
In the case of variable shading, the power-voltage curve may contain two or more maximum power points. Conventional MPPTs usually exploit local MPP, which may not be the optimum MPP. The innovative BlueSolar algorithm always maximizes energy harvest by exploiting the optimum MPP.
BatteryLife: intelligent
If a solar charge controller cannot fully recharge the battery in one day, the result is often that the battery constantly fluctuates between 'partially charged' and 'fully discharged'. This condition (no regular full charge) will destroy a lead-acid battery within a few weeks or months. The BatteryLife algorithm monitors the state of charge of the battery and, if necessary, increases the load disconnect level slightly from day to day (by disconnecting the load earlier) until the harvested solar energy is sufficient to charge the battery to almost 100%. From that point on, the load disconnect level is modulated so that the battery is charged to almost 100% approximately once per week.
Programmable battery charging algorithm
The charge controller starts a new charge cycle every morning as soon as the sun starts to shine, based on a three-step charging process: Bulk – Absorption - Float. The battery charging algorithm is programmable with a set of default settings or user-defined settings.
Internal temperature sensor
Compensates absorption and float charge voltages for temperature.
Remote on/off
For example, for connection to a VE.BUS BMS.
Programmable relay
Can be programmed (eg via smartphone) to be activated by an alarm or other events.
Optional: linkable LC display
To do this, remove the rubber seal that protects the plug on the front of the controller and connect the display to it.
