SeaFlo 33 Series water Pressure System
A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a 3 chamber diaphragm pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a Plate mounted board. Serves 3 or more 1/2" (13mm) outlets.
FEATURES & BENEFITS
--Powerful 3.0 gallons/11.3 litres per minute of flow.
--Ultra quiet with constant and steady flow.
--Superior self-priming capabilities.
--Powerful enough to supply up to 3 fixtures.
--Built-in adjustable pressure switch.
--Easy pre-assembled installation.
--Heavy-duty, corrosion resistant motor.
--Capable of being run dry without damage.
--Can be fitted to new or existing systems.
-?Can be fitted to new or existing systems.
TYPICAL APPLICATIONS
Marine, RV, Filtration
PUMP
Type - 3 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
Control Type - Pressure switch
Max Recommended Temperature - 60° C（140° F）
Priming Capabilities - 6 feet (1.8 m) suction lift
Re-start Pressure - 45 PSI：35 ± 5 PSI (± 0.3 bar)
Inlet/Outlet Ports - 1/2" MNPT
Weight - 11.9 lbs (5.4 kg)
MOTOR
Leads - 16 AWG, 13" (33 cm) long with 2-Pin connector/Leads
Duty Cycle - Intermittent
Max. Amp Draw - 8.0 AFuse12.0 A
A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a 3 chamber diaphragm pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a Plate mounted board. Serves 3 or more 1/2" (13mm) outlets.
FEATURES & BENEFITS
--Powerful 3.0 gallons/11.3 litres per minute of flow.
--Ultra quiet with constant and steady flow.
--Superior self-priming capabilities.
--Powerful enough to supply up to 3 fixtures.
--Built-in adjustable pressure switch.
--Easy pre-assembled installation.
--Heavy-duty, corrosion resistant motor.
--Capable of being run dry without damage.
--Can be fitted to new or existing systems.
-?Can be fitted to new or existing systems.
TYPICAL APPLICATIONS
Marine, RV, Filtration
PUMP
Type - 3 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
Control Type - Pressure switch
Max Recommended Temperature - 60° C（140° F）
Priming Capabilities - 6 feet (1.8 m) suction lift
Re-start Pressure - 45 PSI：35 ± 5 PSI (± 0.3 bar)
Inlet/Outlet Ports - 1/2" MNPT
Weight - 11.9 lbs (5.4 kg)
MOTOR
Leads - 16 AWG, 13" (33 cm) long with 2-Pin connector/Leads
Duty Cycle - Intermittent
Max. Amp Draw - 8.0 AFuse12.0 A
A fully assembled pressure set that simplifies the installation of water pressure systems for both the professional and amateur installer. The set consists of a 3 chamber diaphragm pump, strainer and pre-pressurized accumulator tank with quick connect electrical connections on a Plate mounted board. Serves 3 or more 1/2" (13mm) outlets.
FEATURES & BENEFITS
--Powerful 3.0 gallons/11.3 litres per minute of flow.
--Ultra quiet with constant and steady flow.
--Superior self-priming capabilities.
--Powerful enough to supply up to 3 fixtures.
--Built-in adjustable pressure switch.
--Easy pre-assembled installation.
--Heavy-duty, corrosion resistant motor.
--Capable of being run dry without damage.
--Can be fitted to new or existing systems.
-?Can be fitted to new or existing systems.
TYPICAL APPLICATIONS
Marine, RV, Filtration
PUMP
Type - 3 Chamber positive displacement diaphragm pump, self priming, capable of being run dry
Control Type - Pressure switch
Max Recommended Temperature - 60° C（140° F）
Priming Capabilities - 6 feet (1.8 m) suction lift
Re-start Pressure - 45 PSI：35 ± 5 PSI (± 0.3 bar)
Inlet/Outlet Ports - 1/2" MNPT
Weight - 11.9 lbs (5.4 kg)
MOTOR
Leads - 16 AWG, 13" (33 cm) long with 2-Pin connector/Leads
Duty Cycle - Intermittent
Max. Amp Draw - 8.0 AFuse12.0 A
